zhangbin.eos

0个粉丝

问答

专栏

资料

zhangbin.eos 发布于 2017-09-25 09:26:05

采纳率 0%

4239

收藏
点赞
分享

微信扫码分享

QQ好友
举报

hi3536 网络配置

海思

eth0配置不了,网口灯也没有亮

/etc/udev/rules.d/.svn # ifconfig eth0 up
libphy: PHY 1:01 not found
eth0: Could not attach to PHY
stmmac_open: Cannot attach to PHY (error: -19)
ifconfig: SIOCSIFFLAGS: No such device

/etc/udev/rules.d/.svn # ifconfig -a
eth0    Link encap:Ethernet  HWaddr 66:E4:25:21:B7:2E
      inet addr:192.168.11.137  Bcast:192.168.11.255  Mask:255.255.255.0
      BROADCAST MULTICAST  MTU:1500  Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
      Interrupt:55

eth1    Link encap:Ethernet  HWaddr 6E:ED:4F:0F:EB:88
      inet addr:192.168.20.138  Bcast:192.168.20.255  Mask:255.255.255.0
      inet6 addr: fe80::6ced:4fff:fe0f:eb88/64 Scope:Link
      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      RX packets:4523 errors:0 dropped:613 overruns:0 frame:0
      TX packets:55 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:453011 (442.3 KiB)  TX bytes:3544 (3.4 KiB)
      Interrupt:55 Base address:0x4000

lo       Link encap:Local Loopback
      inet addr:127.0.0.1  Mask:255.0.0.0
      inet6 addr: ::1/128 Scope:Host
      UP LOOPBACK RUNNING  MTU:65536  Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:0
      RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

/etc/udev/rules.d/.svn # ifconfig eth1 up
/etc/udev/rules.d/.svn #

我来回答

回答4个

时间排序

认可量排序

zhangbin.eos

0个粉丝

问答

专栏

资料

zhangbin.eos 2017-09-25 09:30:32

认可0 回复引用举报

看到了一下目录的这些文件,但是不知道怎么使
/sys/devices/platform/stmmaceth.0/net/eth0 # ls -R
.:
addr_assign_type  dormant          mtu             subsystem
addr_len       duplex          netdev_group    tx_queue_len
address          flags          operstate       type
broadcast       ifalias          power          uevent
carrier          ifindex          queues
dev_id          iflink          speed
device          link_mode       statistics

./power:
autosuspend_delay_ms runtime_active_time    runtime_suspended_time
control                runtime_status

./queues:
rx-0  tx-0

./queues/rx-0:
rps_cpus    rps_flow_cnt

./queues/tx-0:
byte_queue_limits  tx_timeout       xps_cpus

./queues/tx-0/byte_queue_limits:
hold_time  inflight limit    limit_max  limit_min

./statistics:
collisions          rx_frame_errors    tx_compressed
multicast          rx_length_errors    tx_dropped
rx_bytes          rx_missed_errors    tx_errors
rx_compressed       rx_over_errors    tx_fifo_errors
rx_crc_errors       rx_packets          tx_heartbeat_errors
rx_dropped          tx_aborted_errors tx_packets
rx_errors          tx_bytes          tx_window_errors
rx_fifo_errors    tx_carrier_errors
/sys/devices/platform/stmmaceth.0/net/eth0 #

yzhiju

0个粉丝

问答

专栏

资料

yzhiju 2017-12-13 18:56:31

认可0 回复引用举报

你好请问你找到问题了吗我也遇见跟你一样的问题

yzhiju

0个粉丝

问答

专栏

资料

yzhiju 2017-12-13 19:20:02

认可0 回复引用举报

dmesg 发现phy0 的ID为0 内核配置stmmac改下id就好了

zhangbin.eos

0个粉丝

问答

专栏

资料

zhangbin.eos 2017-12-20 14:42:05

认可0 回复引用举报

[quote][url=forum.php?mod=redirect&goto=findpost&pid=82073&ptid=23628]yzhiju 发表于 2017-12-13 19:20[/url]
dmesg 发现phy0 的ID为0 内核配置stmmac改下id就好了[/quote]

非常感谢!

hi3536 网络配置

Markdown 语法

Markdown 语法