hi3559admeb ver.c 网络不通

海思

本帖最后由 eiudng 于 2020-4-23 08:55 编辑

用Hitool通过串口烧录自己编译的uboot，kernel和rootfs，配置启动信息后，想配置网络，打印信息是 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready，请问怎么解决？thx

libphy: hisi_gemac_mii_bus: probed
libphy: hisi_gemac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
hi_gmac_v200 101c0000.ethernet: invalid resource
hi_gmac_v200 101c0000.ethernet (unnamed net_device) (uninitialized): using random MAC address 86:c5:de:6c:85:ac
attached PHY 1 to driver Generic PHY, PHY_ID=0x1cc916
Higmac dma_sg_phy: 0x0000000063c80000
ETH: rmii, phy_addr=1
hi_gmac_v200 101e0000.ethernet: invalid resource
hi_gmac_v200 101e0000.ethernet (unnamed net_device) (uninitialized): using random MAC address 2e:29:38:30:83:e9
phy 3 not found

我来回答

回答3个

时间排序

认可量排序

eiudng

0个粉丝

问答

专栏

资料

eiudng 2020-04-22 09:18:12

认可0 回复引用举报

本帖最后由 eiudng 于 2020-4-23 13:42 编辑

经过倒腾，
hi_gmac_v200 101c0000.ethernet eth0: Link is Down
hi_gmac_v200 101c0000.ethernet eth0: Link is Up - 10Mbps/Full - flow control off
hi_gmac_v200 101c0000.ethernet eth0: Link is Down
hi_gmac_v200 101c0000.ethernet eth0: Link is Up - 10Mbps/Full - flow control off
hi_gmac_v200 101c0000.ethernet eth0: Link is Down
hi_gmac_v200 101c0000.ethernet eth0: Link is Up - 10Mbps/Full - flow control off
hi_gmac_v200 101c0000.ethernet eth0: Link is Down

开发板可以ping通pc，pc机ping不通开发板

eiudng

0个粉丝

问答

专栏

资料

eiudng 2020-04-22 14:02:54

认可0 回复引用举报

本帖最后由 eiudng 于 2020-4-22 14:06 编辑

[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S01udev
[RCS]: /etc/init.d/S80network
Auto login as root ...
login[1336]: root login on 'ttyS000'
Welcome to HiLinux.
None of nfsroot found in cmdline.
~ # ifconfig eth0 192.168.1.11
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
~ # ifconfig eth0 192.168.1.11
~ # hi_gmac_v200 101c0000.ethernet eth0: Link is Up - 10Mbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
hi_gmac_v200 101c0000.ethernet eth0: Link is Down
hi_gmac_v200 101c0000.ethernet eth0: Link is Up - 10Mbps/Full - flow control off
hi_gmac_v200 101c0000.ethernet eth0: Link is Down
hi_gmac_v200 101c0000.ethernet eth0: Link is Up - 10Mbps/Full - flow control off
hi_gmac_v200 101c0000.ethernet eth0: Link is Down

防火墙关闭

:Q:Q

qn1583393923

0个粉丝

问答

专栏

资料

qn1583393923 2020-07-01 18:02:20

认可0 回复引用举报

[quote][url=forum.php?mod=redirect&goto=findpost&pid=157091&ptid=79932]eiudng 发表于 2020-4-22 14:02[/url]
[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S01udev
[RCS]: /etc/init.d/S80network
[/quote]

解决了吗？如何解决的？