每次启动卡死在这里，有没有大神遇到过这样的问题

[    0.698666] ======== PULL WL_REG_ON(-1) HIGH! ========
[    0.698676] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    0.698687] [WLAN_RFKILL]: wifi turn on power. -1
[    0.698719] hctosys: unable to open rtc device (rtc0)
[    0.699054] vcc_sd: disabling
[    0.699076] vccio_sd: disabling
[    0.702966] mmc1: MAN_BKOPS_EN bit is not set
[    0.706445] mmc_host mmc1: Bus speed (slot 0) = 147456000Hz (slot req 150000000Hz, actual 147456000HZ div = 0)
[    0.715273] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    0.752282] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    0.793289] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[    0.999198] wifi_platform_bus_enumerate device present 1
[    0.999216] ======== Card detection to detect SDIO card! ========
[    0.999225] mmc2:mmc host rescan start!
[    1.456964] dwmmc_rockchip ff490000.dwmmc: Successfully tuned phase to 247
[    1.457339] mmc1: new HS200 MMC card at address 0001
[    1.458669] mmcblk1: mmc1:0001 8GME4R 7.28 GiB
[    1.459432] mmcblk1boot0: mmc1:0001 8GME4R partition 1 4.00 MiB
[    1.460321] mmcblk1boot1: mmc1:0001 8GME4R partition 2 4.00 MiB
[    1.461089] mmcblk1rpmb: mmc1:0001 8GME4R partition 3 512 KiB
[    1.467072]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
u?   1.474523]