在rv1126上测试openvx，出现GPU[0] hang 错误。

GPU 的执行流程被中断，我推测是GPU 驱动版本问题

启动的时候运行S05NUP_init的时候出现如下错误：
galcore ffbc0000.npu: Failed to increase volt 950000

系统启动的时候，有如下错误，不知道那个错误导致的GPU无法正常工作。

[ 2.870472] galcore: npu init.
[ 2.871311] galcore: start npu probe.
[ 2.871485] galcore ffbc0000.npu: Linked as a consumer to regulator.6
[ 2.872212] Galcore version 6.4.6.5.351518
[ 2.872227] Galcore options:
[ 2.875133] Galcore Info: ContiguousBase=0x3f954000 ContiguousSize=0x400000
[ 2.879918] Galcore Info: MMU mapped core 0 SRAM[0] hardware virtual address=0x400000 size=0x40000
[ 2.879954] Galcore Info: MMU mapped core 0 SRAM[1] hardware virtual address=0x440000 size=0x40000
[ 2.882192] galcore ffbc0000.npu: Init npu devfreq
[ 2.882235] galcore ffbc0000.npu: bin=0
[ 2.882292] galcore ffbc0000.npu: leakage=1.125
[ 2.882583] galcore ffbc0000.npu: Failed to set pvtm_volt
[ 2.882664] galcore ffbc0000.npu: Failed to get pvtm
[ 2.882699] galcore ffbc0000.npu: bin-scale=23
[ 2.883277] galcore ffbc0000.npu: avs=0
[ 2.883504] galcore ffbc0000.npu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 2.883533] galcore ffbc0000.npu: failed to read out thermal zone (-22)
[ 2.883618] galcore ffbc0000.npu: failed to find power_model node
[ 2.883632] galcore ffbc0000.npu: failed to initialize power model
[ 2.886532] galcore ffbc0000.npu: Failed to increase volt 950000