xyyy

xyyy

0个粉丝

1

问答

0

专栏

0

资料

xyyy  发布于  2025-07-18 09:26:43
采纳率 0%
1个问答
401

hi3519dv500运行后不出流,打印get venc stream time out, exit thread

hi3519dv500+os04a10的模组,用出厂自带的程序运行,一直打印get venc stream time out, exit thread,试了vio,aiisp,venc,都是一样的打印,硬件没有动过,排线正常,重新装了排线,,还是一样的问题。

看vi都是空的
~ # cat /proc/umap/vi

[VI] Version: [HI3519DV500_MPP_V2.0.2.0 B050 Release], Build Time[Dec 20 2024, 16:23:07]

————————————————————vi module param————————————————————————————————-
max_out_width max_out_height detect_err_frame drop_err_frame
8192 8192 0 0

————————————————————vi vpss mode & vi aiisp mode & fmu mode————————————————————-
pipe_id vi_vpss_mode vi_aiisp_mode fmu_mode
0 vi_offline_vpss_offline default off
1 vi_offline_vpss_offline default off
2 vi_offline_vpss_offline default off
3 vi_offline_vpss_offline default off
4 vi_offline_vpss_offline default off
5 vi_offline_vpss_offline default off
6 vi_offline_vpss_offline default off
7 vi_offline_vpss_offline default off
8 vi_offline_vpss_offline default off
9 vi_offline_vpss_offline default off
10 vi_offline_vpss_offline default off
11 vi_offline_vpss_offline default off
12 vi_offline_vpss_offline default off
13 vi_offline_vpss_offline default off
14 vi_offline_vpss_offline default off

————————————————————vi dev attr1——————————————————————————————————
dev_id dev_status intf_mode work_mode comp_mask0 comp_mask1 scan_mode
0 enable mipi 1mux fff00000 0 progressive

————————————————————vi dev attr2——————————————————————————————————
dev_id data_seq data_type data_reverse width height data_rate irq_affinity
0 yvyu raw N 2688 1520 x1 0

————————————————————vi thermo sns attr———————————————————————————————
dev_id work_mode ooc_width ooc_height ooc_bitwidth cfg_num frame_rate sd_mux0 sd_mux1 sd_mux2 sd_mux3

————————————————————vi dev detect info———————————————————————————————
dev_id valid_width valid_height em_data_size total_width vfb_height vbb_height
0 2688 0 0 65520 17 0

————————————————————vi stitch grp attr———————————————————————————————
grp_id stitch_en cfg_mode max_pts_gap pipe_num pipe_id

————————————————————vi bind attr——————————————————————————————————
dev_id pipe_num pipe_id
0 1 0

————————————————————vi wdr fusion grp attr—————————————————————————————
grp_id wdr_mode cache_line pipe_num pipe_id pipe_reverse
0 none 1520 1 0 N

————————————————————vi pipe attr1—————————————————————————————————-
pipe_id bypass_mode isp_bypass width height pixel_format compress_mode
0 bypass_none N 2688 1520 raw12 line

————————————————————vi pipe attr2—————————————————————————————————-
pipe_id bit_align_mode src_rate dst_rate frame_source vc_num vb_src vb_pool
0 high -1 -1 src_fe 0 common -1

————————————————————vi pipe psfm attr———————————————————————————————-
pipe_id enable rect_x rect_y rect_width rect_height
0 N 0 0 0 0

————————————————————vi aiisp pool attr———————————————————————————————
pipe_id aiisp_type in_pool_id out_pool_id net_type

————————————————————vi pipe param—————————————————————————————————-
pipe_id discard_pro_pic_en out_mode data_rate yuv_skip_en signed_bit_extend_en bnr_info_en nr_effect_mode
0 N norm x1 Y N N advance

————————————————————vi pipe bnr buf num——————————————————————————————-
pipe_id bnr_buf_num
0 2

————————————————————vi pipe mcf info————————————————————————————————
pipe_id mcf_vi_en queue_full ref_ok last_pts ref_pts

————————————————————vi pipe pre crop attr—————————————————————————————-
pipe_id enable rect_x rect_y rect_width rect_height
0 N 0 0 0 0

————————————————————vi pipe post crop attr—————————————————————————————
pipe_id enable rect_x rect_y rect_width rect_height
0 N 0 0 0 0

————————————————————vi pipe 3dnr attr———————————————————————————————-
pipe_id enable nr_type compress_mode nr_motion_mode
0 Y NORM frame NORM

————————————————————vi pipe 3dnr param———————————————————————————————

————————————————————vi pipe0 3dnr param——————————————————————————————-
pipe version opt_mode iso ref1_en
0 VER_1 MANUAL 0 1
nry0_en nry1_en nry2_en nry3_en nrc0_en nrc1_en limit_range_en
0 1 1 1 1 1 0
sfs1_0 sfs2_1 sfs2_2 sfs2_3 sfc sfs2_c
3 0 30 0 10 10
sfs1_1 sfs4_1 sfs4_2 sfs4_3 trc
8 0 30 0 20
tfs0_1 tfs0_2
0 12
tfs1_1 tfs1_2 adv_math
0 12 0
sfn_1 sfn_2 sfn_3
0_2_4_0 4_2_4_0 0_2_4_0
sfn_4
0_2_4_0
math_0 math0_1 math0_2
128 200 400
math1_1 math1_2
200 999

————————————————————vi pipe frame dump attr————————————————————————————-
pipe_id enable depth
0 N 0

————————————————————vi pipe private data dump attr—————————————————————————
pipe_id enable data_mode depth data_size
0 N back 0 0

————————————————————vi pipe low delay attr—————————————————————————————
pipe_id enable line_cnt one_buf
0 N 0 N

————————————————————vi pipe frame interrupt attr——————————————————————————
pipe_id interrupt_type early_line
0 start 0

————————————————————vi pipe user pic attr—————————————————————————————-
pipe_id enable width height stride pixel_format pool_id phy_addr
0 N 0 0 0 n/a 0 0

————————————————————vi pipe snap attr———————————————————————————————-
pipe_id snap_type load_ccm_en frame_cnt repeat_send_times zsl_en frame_depth rollback_ms interval op_mode

————————————————————vi pipe status—————————————————————————————————
pipe_id enable int_en width height int_cnt send_cnt lost_cnt vb_fail_cnt frame_rate
0 Y Y 2688 1520 7122 0 7121 0 0

————————————————————vi pipe offline task statistics————————————————————————-
pipe_id receive_pic_cnt busy_num task_submit_cnt task_fail_cnt task_cost_time max_cost_time
0 0 0 0 0 0 0

————————————————————vi phys chn attr1———————————————————————————————-
pipe_id chn_id width height pixel_format dynamic_range video_format compress_mode mirror flip
0 0 2688 1520 yvu-sp420 sdr8 linear seg N N

————————————————————vi phys chn attr2———————————————————————————————-
pipe_id chn_id depth src_rate dst_rate vb_src vb_pool align
0 0 0 -1 -1 common -1 0

————————————————————vi phys chn motion_denoise status———————————————————————-
pipe_id chn_id motion_denoise

————————————————————vi phys chn dis config—————————————————————————————
pipe_id chn_id mode motion_level pdt_type buf_num crop_ratio frame_rate camera_steady scale ref_num
0 0 4_DOF_GME Low RECORDER 0 0 0 0 0 0

————————————————————vi phys chn dis attr1—————————————————————————————-
pipe_id chn_id enable gdc_bypass mov_sub roef timelag hor_limit ver_limit still_crop strength ref_slope
0 0 N N 0 0 0 0 0 N 0 0

————————————————————vi phys chn dis attr2—————————————————————————————-
pipe_id chn_id dis_ldc_en focal_len_x focal_len_y coord_shift_x coord_shift_y max_du
0 0 N 0 0 0 0 0

————————————————————vi phys chn dis attr3—————————————————————————————-
pipe_id chn_id rotation_compensation_en max_roll_delta final_roll
0 0 N 0 0

————————————————————vi phys chn dis param—————————————————————————————-
pipe_id chn_id large_motion_stable_coef low_freq_motion_preserve low_freq_motion_freq
0 0 100 10 100

————————————————————vi phys chn dis wdr_attr————————————————————————————
pipe_id chn_id match_frame
0 0 0

————————————————————vi chn low delay attr—————————————————————————————-
pipe_id chn_id enable line_cnt one_buf
0 0 N 0 N

————————————————————vi chn crop info————————————————————————————————
pipe_id chn_id crop_en coord x y width height trim_x trim_y trim_width trim_height
0 0 N ABS 0 0 0 0

————————————————————vi chn status—————————————————————————————————-
pipe_id chn_id enable width height send_cnt vb_fail_cnt lost_frame_cnt frame_rate
0 0 Y 0 0 0 0 0 0

————————————————————vi chn out frame info—————————————————————————————-
pipe_id chn_id width height compress_mode low_delay_frame delay
0 0 0 0 none N 0

————————————————————vi interrupt cost time statistics———————————————————————-
isp_time isp_max_time vicap_time vicap_max_time viproc_time viproc_max_time int_time_per_sec load_ratio_0
5 3014 8 3122 0 0 3046 NA

logmpp里也有报错

生成的流文件是空的

我来回答
回答2个
时间排序
认可量排序

四叶草~

41个粉丝

50

问答

132

专栏

49

资料

四叶草~ 2025-07-18 09:34:00
认可1

查看确认sensor的指向是不是os04a10,如果不是需要修改指向的

www

0个粉丝

1

问答

0

专栏

0

资料

www 2025-11-27 15:02:44
认可0

请问解决了吗

或将文件直接拖到这里
悬赏:
E币
网盘
* 网盘链接:
* 提取码:
悬赏:
E币

Markdown 语法

  • 加粗**内容**
  • 斜体*内容*
  • 删除线~~内容~~
  • 引用> 引用内容
  • 代码`代码`
  • 代码块```编程语言↵代码```
  • 链接[链接标题](url)
  • 无序列表- 内容
  • 有序列表1. 内容
  • 缩进内容
  • 图片![alt](url)
+ 添加网盘链接/附件

Markdown 语法

  • 加粗**内容**
  • 斜体*内容*
  • 删除线~~内容~~
  • 引用> 引用内容
  • 代码`代码`
  • 代码块```编程语言↵代码```
  • 链接[链接标题](url)
  • 无序列表- 内容
  • 有序列表1. 内容
  • 缩进内容
  • 图片![alt](url)
相关问答
无更多相似问答 去提问
举报反馈

举报类型

  • 内容涉黄/赌/毒
  • 内容侵权/抄袭
  • 政治相关
  • 涉嫌广告
  • 侮辱谩骂
  • 其他

详细说明

易百纳技术社区