SS928 nand flash系统启动加载mpi库失败

1.使用的是nand flash 启动，内存4G ，flash 1G
2.系统能启动但是加载的mpi库没有成功（即脚本执行没成功）失败部分log如下请大神帮忙看下。
[2025-09-17 15:20:04.935]VFS: Mounted root (ubifs filesystem) on device 0:12.
[2025-09-17 15:20:04.935]devtmpfs: mounted
[2025-09-17 15:20:04.936]Freeing unused kernel memory: 384K
[2025-09-17 15:20:04.945]Run /sbin/init as init process
[2025-09-17 15:20:05.056][RCS]: /etc/init.d/S00devs
[2025-09-17 15:20:05.057][RCS]: /etc/init.d/S01udev
[2025-09-17 15:20:05.148][RCS]: /etc/init.d/S99_Autorun.sh
[2025-09-17 15:20:05.149]i2c_soft: loading out-of-tree module taints kernel.
[2025-09-17 15:20:05.167]sprd_pci_ep_dev_init Quectel_Linux&Android_SPRD_PCIE_Driver_V1.1.8
[2025-09-17 15:20:05.167]sipc: name=sprd,sipc
[2025-09-17 15:20:05.167]sipc: type=1
[2025-09-17 15:20:05.168]sipc: dst =1
[2025-09-17 15:20:05.181]sipc: ep_dev=0
[2025-09-17 15:20:05.181]sipc: smem_type = 0
[2025-09-17 15:20:05.181]sipc: smem_base=0x5d000000, dst_smem_base=0x5d000000, smem_size=0x300000
[2025-09-17 15:20:05.183]sipc: high_offset=0x0n
[2025-09-17 15:20:05.197]smsg_ipc_create: sprd,sipc
[2025-09-17 15:20:05.198]smem_init: pool addr = 0x5d000000, size = 0x300000 added.
[2025-09-17 15:20:05.213]smsg_ipc_smem_init: ring_base = 0x5d000000, ring_size = 0x1000
[2025-09-17 15:20:05.214]spipe_probe!
[2025-09-17 15:20:05.230]spipe: after parse device tree, name=spipe_nr, dst=1, channel=4, ringnr=15, rxbuf_size=0x1000, txbuf_size=0x1000
[2025-09-17 15:20:05.230]sbuf_host_init: channel 1-4, offset = 0x0!
[2025-09-17 15:20:05.230]smsg_ch_open: channel 1-4 send open msg!
[2025-09-17 15:20:05.230]spipe_probe!
[2025-09-17 15:20:05.231]pcie res: request resource, state=0.
[2025-09-17 15:20:05.245]spipe: after parse device tree, name=sdiag_nr, dst=1, channel=21, ringnr=1, rxbuf_size=0x8000, txbuf_size=0x40000
[2025-09-17 15:20:05.245]sbuf_host_init: channel 1-21, offset = 0x0!
[2025-09-17 15:20:05.245]smsg_ch_open: channel 1-21 send open msg!
[2025-09-17 15:20:05.247]spipe_probe!
[2025-09-17 15:20:05.259]spipe: after parse device tree, name=stty_nr, dst=1, channel=6, ringnr=32, rxbuf_size=0x800, txbuf_size=0x800
[2025-09-17 15:20:05.259]sbuf_host_init: channel 1-6, offset = 0x0!
[2025-09-17 15:20:05.259]smsg_ch_open: channel 1-6 send open msg!
[2025-09-17 15:20:05.262]spipe_probe!
[2025-09-17 15:20:05.274]spipe: after parse device tree, name=snv_nr, dst=1, channel=40, ringnr=1, rxbuf_size=0x1000, txbuf_size=0x40400
[2025-09-17 15:20:05.275]sbuf_host_init: channel 1-40, offset = 0x0!
[2025-09-17 15:20:05.289]smsg_ch_open: channel 1-40 send open msg!
[2025-09-17 15:20:05.289]spool: name=slog_nr, dst=1, channel=5, pre_cfg=0
[2025-09-17 15:20:05.290]spool: tx_num=0, tx_size=0, rx_num=32, rx_size=65536
[2025-09-17 15:20:05.299]smsg_ch_open: channel 1-5 send open msg!
[2025-09-17 15:20:05.316][err] os_mem[256], over total_mem[Invalid] - dsp_mem[62] - reserve_mem[0]
[2025-09-17 15:20:05.317][RCS]: /etc/init.d/S99_app
[2025-09-17 15:20:05.333]ifdown: interface lo not configured
[2025-09-17 15:20:05.334]ifdown: interface eth0 not configured
[2025-09-17 15:20:05.358]IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[2025-09-17 15:20:05.380][RCS]: /etc/init.d/S99_endoscope_cfg.sh

内存加载失败，总内存获取失败？