ss928 mipi输入，检测不到数据帧

root@localhost:~# cat /proc/umap/mipi_rx

[MIPI_RX] Version: [SS928V100V1.0.0.0 B010 Release], Build Time[Jan 4 2025, 16:42:57]

——-mipi lane divide mdoe——————————————————————————————————————————————-
mode lane divide
0 8

——-mipi dev attr——————————————————————————————————————————————————-
devno work_mode data_rate data_type wdr_mode img_x img_y img_w img_h
0 mipi X2 yuv422_8bit none 0 0 3840 2160

——-mipi lane info——————————————————————————————————————————————————-
devno lane_id
0 4, 5, 6, 7, 0, 1, 2, 3

——-mipi phy data info———————————————————————————
phy_id lane_id phy_data mipi_data lvds_data freq
0 0, 1, 2, 3 0x00,0x00,0x00,0x00 0x01,0x6a,0x8c,0x0a 0x00,0x00,0x00,0x00 156MHZ
1 4, 5, 6, 7 0x00,0x00,0x00,0x00 0x01,0x6a,0x8c,0x0a 0x00,0x00,0x00,0x00 156MHZ

——-mipi detect info——————————————————————————
devno vc width height
0 0 3840 2160
0 1 0 0
0 2 0 0
0 3 0 0

——-phy cil err int info——————————————————————-
phy_id clk2_tmout clk_tmout lane0_tmout lane1_tmout lane2_tmout lane3_tmout clk2_esc clk_esc lane0_esc lane1_esc lane2_esc lane3_esc
0 0 0 0 0 0 0 0 1 20 0 1 0
1 0 0 0 0 0 0 0 0 0 0 0 9

——-mipi error int info1—————————————————————————————-
devno ecc2 vc0_crc vc1_crc vc2_crc vc3_crc vc0_ecc_corrct vc1_ecc_corrct vc2_ecc_corrct vc3_ecc_corrct
0 0 55239120 0 0 0 1 0 0 0

——-mipi error int info2—————————————————————————————-
devno vc0_frmnum vc1_frmnum vc2_frmnum vc3_frmnum vc0_frmmmatch vc1_frmmmatch vc2_frmmmatch vc3_frmmmatch
0 1 0 0 0 1 0 0 0

——-mipi error int info3—————————————————————————————-
devno data_fifo_rderr cmd_fifo_rderr vsync cmd_fifo_wrerr data_fifo_wrerr
0 0 0 0 0 0

——-align error int info———————————————————
devno fifo_fullerr lane0_err lane1_err lane2_err lane3_err lane4_err lane5_err lane6_err lane7_err
0 1 0 1 0 1 0 1 0 1
然后cat /dev/logmpp log如下

undefined

undefined

<3>[ vi] [func]:vi_pipe_send_capture_frame [line

]:318 [info]:pipe 0 capture frame failed!

undefined

undefined

undefined

undefined

undefined

undefined

这个主要是哪里配置出了问题