Hi3519DV500 接寰宇模组的mipi YUV422初始化vi报错

Hi3519DV500 接寰宇模组的mipi YUV422初始化vi报错：
[MPP] Version: [HI3519DV500_MPP_V2.0.2.0 B050 Release], Build Time[Dec 20 2024, 16:23:07]

[sample_comm_vi_start_one_pipe]-1373: vi create pipe(3) failed with 0xa0108007!
[sample_comm_vi_start_vi]-1765: start pipe failed!
[sample_vo_mipi_tx]-688: start vi failed with 0xffffffff!
[main]-840: sample_vo exit abnormally!
cat /dev/logmpp

undefined

下面是配置：
参考了另外一个贴https://www.ebaina.com/ask/100000051841 专门适配过的参数：
pipe_info[i].pipe_attr.pixel_format = OT_PIXEL_FORMAT_YVU_SEMIPLANAR_422;
pipe_info[i].pipe_attr.compress_mode = OT_COMPRESS_MODE_NONE;

static ot_vi_dev_attr g_mipi_raw_dev_attr = {
.intf_mode = OT_VI_INTF_MODE_MIPI_YUV422,

/* Invalid argument */
.work_mode = OT_VI_WORK_MODE_MULTIPLEX_1,

/* mask component */
/* .component_mask = {0xfff00000, 0x00000000}, */
.component_mask = {0xFF000000, 0x00FF0000},

.scan_mode = OT_VI_SCAN_PROGRESSIVE,

/* Invalid argument */
.ad_chn_id = {-1, -1, -1, -1},

/* data seq */
.data_seq = OT_VI_DATA_SEQ_YUYV,  //OT_VI_DATA_SEQ_YVYU,

/* sync param */
.sync_cfg = {
    .vsync           = OT_VI_VSYNC_FIELD,
    .vsync_neg       = OT_VI_VSYNC_NEG_HIGH,
    .hsync           = OT_VI_HSYNC_VALID_SIG,
    .hsync_neg       = OT_VI_HSYNC_NEG_HIGH,
    .vsync_valid     = OT_VI_VSYNC_VALID_SIG,
    .vsync_valid_neg = OT_VI_VSYNC_VALID_NEG_HIGH,
    .timing_blank    = {
        /* hsync_hfb      hsync_act     hsync_hhb */
        0,                0,            0,
        /* vsync0_vhb     vsync0_act    vsync0_hhb */
        0,                0,            0,
        /* vsync1_vhb     vsync1_act    vsync1_hhb */
        0,                0,            0
    }
},

/* data type */
.data_type = OT_VI_DATA_TYPE_YUV,

/* data reverse */
.data_reverse = TD_FALSE,

/* input size */
.in_size = {2592, 1944},

/* data rate */
.data_rate = OT_DATA_RATE_X1,

};

static combo_dev_attr_t g_mipi_4lane_chn0_xxx_5m_nowdr_attr = {
.devno = 0,
.input_mode = INPUT_MODE_MIPI,
.data_rate = MIPI_DATA_RATE_X1,
.img_rect = {0, 0, 2592, 1944},
.mipi_attr = {
DATA_TYPE_YUV422_8BIT,
OT_MIPI_WDR_MODE_NONE,
{0, 1, 2, 3, -1, -1, -1, -1}
}
};
求大佬指点这种vi 设备初始化接mipi YUV流应该如何操作，海思的文档没有直接的说明