imx678 初始化后，用sample_venc 拉流， mipi detect info 检测宽高为0， 初始化都没有报错

/mnt # ./sample_venc 0 1 1 17
[sample_comm_venc_set_push_rtsp]-2918: set push rtsp flag: 1!
RTSP session created: rtsp://0.0.0.0:554/live0
RTSP session created: rtsp://0.0.0.0:554/live1
[sample_comm_venc_set_save_heif]-2924: set save heif flag: 1!
vi_size: 3840, 2160
[MPP] Version: [HI3519DV500_MPP_V2.0.2.0 B050 Release], Build Time[Dec 20 2024, 16:23:07]
image x:0 width:3840 image y:0 height:2160 pipe_width:3840 pipe_height:2160
linear mode
imx678 cmos_set_image_mode :0 fps:30.00
imx678_i2c_init: st
vi_pipe:0, i2c_dev:5 ==================
———-Sony IMX678 Sensor 4K@30 12bit Initial OK!———-
ISP Dev 0 running !
start encode =====
please input choose gop mode!
0) normal p.
1) dual p.
2) smart p.
0
please input choose rc mode!
c) cbr.
v) vbr.
b) abr.
a) avbr.
x) cvbr.
q) qvbr.
f) fix_qp
c
please press twice ENTER to exit this sample
[sample_comm_venc_get_venc_stream_proc]-2521: get venc stream time out, exit thread
[sample_comm_venc_get_venc_stream_proc]-2521: get venc stream time out, exit thread

mipi detect info 检测宽高为0， 初始化都没有报错

——-mipi lane info——————————————————————————————————————————————————-
devno lane_id speed_mode
0 0, 1, 2, 3, -1, -1, -1, -1 LE1500Mbps

——-mipi clk info——————————————————————————————————————————————————-
devno enable
0 Y

———sns clk info——————————————————————————————————————————————————-
devno enable
0 Y

——-mipi phy data info———————————————————————————
phy_id lane_id phy_data mipi_data lvds_data freq
0 0, 1, 2, 3 0x80,0x40,0x00,0x00 0x2b,0x2a,0x0e,0x00 0x9f,0x70,0x00,0x00 148MHZ
1 4, 5, 6, 7 0x00,0x00,0x00,0x00 0x00,0x00,0x00,0x00 0x00,0x00,0x00,0x00 n/a

——-mipi detect info——————————————————————————
devno vc width height
0 0 0 0
0 1 0 0
0 2 0 0
0 3 0 0