Hi3516EV300+ITE 在配置VI模块的时候出现cread pipe出错

出错信息如下：
/opt/project/Hi3516EV200/HiMedia # ./media
Creat pipe failed with error code 0xa0108003!
Media_EnablePipe failed with 0xffffffff!
HI_Media_Vi_Start failed with 0xffffffff!
MAIN_Media_Start failed with 0xffffffff!

由于是第一次接触配置BT1120接口，很多不是很明确，根据建议配置如下

VI_DEV_ATTR_S DEV_ATTR_BT1120_STANDARD_1MUX_BASE =
{
    /* interface mode */
    VI_MODE_BT1120_STANDARD,
    /* multiplVI_MODE_BT1120_STANDARDex mode */
    VI_WORK_MODE_1Multiplex,
    /* r_mask    g_mask    b_mask*/
    {0xFF000000,    0x00FF0000},
    /* progessive or interleaving */
    VI_SCAN_PROGRESSIVE,
    /*AdChnId*/
    { -1, -1, -1, -1},
    /*enDataSeq, only support yuv*/
    VI_DATA_SEQ_UVUV,

    /* synchronization information */
    {
        /*port_vsync   port_vsync_neg     port_hsync        port_hsync_neg        */
        VI_VSYNC_PULSE, VI_VSYNC_NEG_HIGH, VI_HSYNC_VALID_SINGNAL, VI_HSYNC_NEG_HIGH, VI_VSYNC_NORM_PULSE, VI_VSYNC_VALID_NEG_HIGH,

        /*hsync_hfb    hsync_act    hsync_hhb*/
        {
            0,            1920,        0,
            /*vsync0_vhb vsync0_act vsync0_hhb*/
            0,            1080,        0,
            /*vsync1_vhb vsync1_act vsync1_hhb*/
            0,            0,            0
        }
    },
    /* input data type */
    VI_DATA_TYPE_YUV,
    /* bReverse */
    HI_FALSE,
    {1920, 1080},
    {
        {
            {1920 , 1080},
        },
        {
            VI_REPHASE_MODE_NONE,
            VI_REPHASE_MODE_NONE
        }
    },
    {
        WDR_MODE_NONE,
        1080
    },
    DATA_RATE_X1
};

找不到突破点，无奈求助。注，使用SAMPLE_VIO运行配置选择BT1120同样报错

/opt/Hi3516EV200SDK/Hi3516EV200_SDK_V1.0.1.1/mpp/sample/vio # ./sample_vio 4
[SAMPLE_COMM_VI_SetMipiAttr]-2011: ============= MipiDev 0, SetMipiAttr enWDRMode: 3
[SAMPLE_COMM_VI_StartViPipe]-2752: HI_MPI_VI_CreatePipe failed with 0xa0108003!
[SAMPLE_COMM_VI_CreateSingleVi]-2991: SAMPLE_COMM_VI_StartViPipe failed !
[SAMPLE_COMM_VI_CreateVi]-3146: SAMPLE_COMM_VI_CreateSingleVi failed !
[SAMPLE_COMM_VI_StartVi]-3530: SAMPLE_COMM_VI_CreateVi failed!
[SAMPLE_VIO_ViWdrOffline]-1024: start vi failed.s32Ret:0xffffffff !
[main]-1806: sample_vio exit abnormally!