HI_MPI_VI_CreatePipe failed with 0xa0108003!

[SAMPLE_COMM_VI_GetSensorInfo]-4743: pstViConfig->astViInfo[0].stSnsInfo.enSnsType : 33
[SAMPLE_VENC_CheckSensor]-192: stSnsSize W: 768 stSnsSize H: 288
[SAMPLE_VENC_CheckSensor]-193: stSize W: 384 stSize H: 288
enPixFormat: 25
MipiDev: 1
[SAMPLE_VENC_VI_Init]-113: enSnsType : 33 !
[SAMPLE_VENC_VI_Init]-114: u32SupplementConfig 0!
[SAMPLE_VENC_VI_Init]-132: enVideoFormat : 0 !
[SAMPLE_COMM_VI_SetMipiAttr]-2619: ============= MipiDev 1, SetMipiAttr enWDRMode: 0
[SAMPLE_COMM_VI_CreateVi]-3883: s32WorkingViNum:1 !
[SAMPLE_COMM_VI_StartDev]-3247: ViDev :1!
[SAMPLE_COMM_VI_StartDev]-3248: enSnsType :33!
[SAMPLE_COMM_VI_BindPipeDev]-3309: s32PipeCnt: 1!
[SAMPLE_COMM_VI_BindPipeDev]-3310: stDevBindPipe.PipeId: 0!
[SAMPLE_COMM_VI_BindPipeDev]-3311: stDevBindPipe.u32Num: 1!
[SAMPLE_COMM_VI_StartViPipe]-3498: HI_MPI_VI_CreatePipe failed with 0xa0108003!
[SAMPLE_COMM_VI_CreateSingleVi]-3738: SAMPLE_COMM_VI_StartViPipe failed !
[SAMPLE_COMM_VI_CreateVi]-3893: SAMPLE_COMM_VI_CreateSingleVi failed !
[SAMPLE_COMM_VI_StartVi]-4278: SAMPLE_COMM_VI_CreateVi failed!
[SAMPLE_VENC_VI_Init]-165: SAMPLE_COMM_VI_StartVi failed with -1!
[SAMPLE_VENC_H265_H264]-591: Init VI err for 0xffffffff!
/mnt # cat /dev/logmpp

undefined

——————————————————————————————————————————————————————————————————————————
猜这是pixformat类似的参数写错了的意思，但是我在配置里写了。。。
stViConfig.s32WorkingViNum = 1;
stViConfig.astViInfo[0].stDevInfo.ViDev = ViDev;
stViConfig.astViInfo[0].stPipeInfo.aPipe[0] = ViPipe;
stViConfig.astViInfo[0].stChnInfo.ViChn = ViChn;
stViConfig.astViInfo[0].stChnInfo.enDynamicRange = DYNAMIC_RANGE_SDR8;
stViConfig.astViInfo[0].stChnInfo.enPixFormat = PIXEL_FORMAT_YVU_SEMIPLANAR_422;

printf(“enPixFormat: %d\n”, PIXEL_FORMAT_YVU_SEMIPLANAR_422);

s32Ret = SAMPLE_VENC_VI_Init(&stViConfig, HI_FALSE,u32SupplementConfig);
if(s32Ret != HI_SUCCESS)
{
SAMPLE_PRT(“Init VI err for %#x!\n”, s32Ret);
return HI_FAILURE;
}

有没有大佬指点一下，这个可能是哪边出问题了吖