Hi3519DV500 存在/dev/svp_npu但运行代码报错svp_npu_driver_dev_init Error、svp_npu_resource_init Error等，导致执行失败

`我在鸿鸥派开发板（Hi3519DV500）使用中遇到了如下问题:

• 我运行的固件应该为鸿鸥派出场固件，因为我板子到手后没有重新设置过。
• 源代码为参考Hi3519DV500R001C01SPC011\SVP_PC\SVP_PC\SVP_NNN_PC_V3.0.2.1\SVP_NNN_PC_V3.0.2.1\Sample\samples\samples\2_object_detection\yolo\README.md 示例里的代码
• 使用静态编译后，将包含输出 ./out/main 文件的完整工程复制到SD卡，并命名为 yolo_sample
• 挂载到/home/tf_card/，进入main所在文件夹，执行 ./main 1，结果运行error，具体命令行输出如下，像询问一下是否知晓如何解决：
• 我也搜索到如https://www.ebaina.com/ask/100000050828 里的问题，但是在开发板中我可以搜索到 /dev/svp_npu

  /home/tf_card/yolo_sample/out # ./main 1
  [INFO]  ./main param
  param is model and input image bin pair(default 1)
  [INFO]  param 1: yolov1.om and dog_bike_car_yolov1.bin
  [INFO]  param 2: yolov2.om and dog_bike_car_yolov2.bin
  [INFO]  param 3: yolov3.om and dog_bike_car_yolov3.bin
  [INFO]  param 4: yolov4.om and dog_bike_car_yolov4.bin
  [INFO]  param 5: yolov5.om and dog_bike_car_yolov5.bin
  [INFO]  param 5_cpu: yolov5_cpu.om and dog_bike_car_yolov5.bin
  [INFO]  param 7: yolov7.om and dog_bike_car_yolov7.bin
  [INFO]  param 8: yolov8.om and dog_bike_car_yolov8.bin
  [INFO]  yolo v1
  [Func]:svp_npu_driver_dev_init [Line]:198 [Info]:Error, get runtime resource failed
  [Func]:svp_npu_resource_init [Line]:117 [Info]:Error, init runtime resource failed!
  [ERROR] acl init failed
  [ERROR] sample init resource failed
  [INFO]  end to destroy stream
  [INFO]  end to destroy context
  [Func]:svp_npu_runtime_impl_func_enter [Line]:125 [Info]:Error, runtime has not been initialized or has been finalized
  [Func]:svp_npu_runtime_reset_device [Line]:286 [Info]:Error, svp_npu_runtime_impl_func_enter failed
  [ERROR] reset device failed
  [INFO]  end to reset device is 0
  [Func]:svp_npu_resource_finalize [Line]:158 [Info]:Error, repeated finalize!
  [ERROR] finalize acl failed
  [INFO]  end to finalize acl
  

综上故想询问有无遇到相似问题，或知晓如何解决？