目前使用A191型38板，RV1126+GC2053烧写固件后，GC2053识别失败

分别使用 01.出厂固件 目录下的如下固件尝试启动取图推流程序（文档中说开机就会推流）：
1.update-A191-RV1126-taobao-touch-screen.zip
2.update_GC2053.img
3.A191_38×38_gc2053目录下的固件；
4.GC2053_2.2.5.1目录下的固件；
5.update_A191_RV1126_TaoBao_gc2053_20221014.zip

最终，所有的固件查看kernel log都识别不到gc2053，是不是gc2053坏了呢？
具体log如下：
[root@RV1126_RV1109:/]# dmesg | grep “gc2053”
[ 0.619764] gc2053 1-0037: driver version: 00.01.01
[ 0.619798] gc2053 1-0037: GPIO lookup for consumer reset
[ 0.619802] gc2053 1-0037: using device tree for GPIO lookup
[ 0.619828] of_get_named_gpiod_flags: parsed ‘reset-gpios’ property of node ‘/i2c@ff510000/gc2053@37[0]’ - status (0)[ 0.619860] gc2053 1-0037: GPIO lookup for consumer pwdn
[ 0.619863] gc2053 1-0037: using device tree for GPIO lookup
[ 0.619872] of_get_named_gpiod_flags: can’t parse ‘pwdn-gpios’ property of node ‘/i2c@ff510000/gc2053@37[0]’
[ 0.619881] of_get_named_gpiod_flags: can’t parse ‘pwdn-gpio’ property of node ‘/i2c@ff510000/gc2053@37[0]’
[ 0.619886] gc2053 1-0037: using lookup tables for GPIO lookup
[ 0.619891] gc2053 1-0037: No GPIO consumer pwdn found
[ 0.619894] gc2053 1-0037: Failed to get pwdn-gpios, maybe no used
[ 0.619909] gc2053 1-0037: GPIO lookup for consumer power
[ 0.619912] gc2053 1-0037: using device tree for GPIO lookup
[ 0.619922] of_get_named_gpiod_flags: can’t parse ‘power-gpios’ property of node ‘/i2c@ff510000/gc2053@37[0]’
[ 0.619931] of_get_named_gpiod_flags: can’t parse ‘power-gpio’ property of node ‘/i2c@ff510000/gc2053@37[0]’
[ 0.619935] gc2053 1-0037: using lookup tables for GPIO lookup
[ 0.619938] gc2053 1-0037: No GPIO consumer power found
[ 0.619942] gc2053 1-0037: Failed to get power-gpios
[ 0.620028] gc2053 1-0037: Linked as a consumer to regulator.2
[ 0.620068] gc2053 1-0037: Linked as a consumer to regulator.4
[ 0.620110] gc2053 1-0037: Linked as a consumer to regulator.3
[ 0.620128] gc2053 1-0037: lane_num(2) pixel_rate(118800000)
[ 0.620179] gc2053 1-0037: could not get sleep pinstate
[ 0.626178] gc2053 1-0037: gc2053 read reg(0xf0 val:0x0) failed !
[ 0.626460] gc2053 1-0037: gc2053 read reg(0xf1 val:0x0) failed !
[ 0.626491] gc2053 1-0037: gc2053_read_reg failed (-6)
[ 0.626611] gc2053 1-0037: Dropping the link to regulator.2
[ 0.626670] gc2053 1-0037: Dropping the link to regulator.4
[ 0.626709] gc2053 1-0037: Dropping the link to regulator.3
[root@RV1126_RV1109:/]#