G610Q-IPC-38E连接不到扩展板GPIC--io-38e-v1.1

使用官方固件，按照手册G610Q-IPC-38E快速体验手册_V1.4* 跑3.15 WiFi 测试的时候，无法加载wifi借口。蓝牙测试也不行。
这扩展板使用是需要什么特殊的方式开启吗？已经按照指示，连接了2组线。而且我测试了3套模组，都是一样的问题。而且我量了一下。12v和usb5v电压都是有的。

~ # lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003

这里并看不到设备

这是运行时候的输出，可以看见并找不到硬件。上电失败。
`ln: /lib/libnl-3.so.200: File exists
ln: /lib/libnl-genl-3.so.200: File exists
plat_soc:W]ini_file_name@/etc/ws73/ws73_cfg.ini
plat_soc:EMERG]0:emerg log.
plat_soc:ALERT]1:alert log.
plat_soc:CRIT]2:crit log.
plat_soc:E]3:err log.
plat_soc:W]4:warning log.
plat_soc:E]custom ini[plat kern log level]: 7.
plat_soc:E]request power_gpio fail, but still use power on gpio.
plat_soc:E]board_power_gpio_init::succ, power_gpio_idx=[46]!
plat_soc:E]board_wakeup_gpio_init::succ, wkup_gpio_idx=[70]!
[USB][I]OFF —> INIT
[usb_set_bus_state:87]
usbcore: registered new interface driver wireless_usb
plat_soc:E]hcc diag log service ini ok
plat_soc:W]plat_misc_init!
plat_soc:W]plat_init_etc::succ!

insmod wifi ko beginning!
[FRW] frw_timer_init enter
frw_start_hcc_service type:6, ret=0
frw_start_hcc_service type:4, ret=0
[FRW] frw_main_init_etc end
hwifi_custom_host_read_cfg_init finish!
hwifi_cfg_host_global_init_param: rx_stbc[1] ret[0]
hwifi_cfg_tcp_ack_param_init: tcp_ack_filter_enable[1] ret[0]
hwifi_cfg_tcp_ack_param_init: tcp_ack_max_num_start_process[2] ret[0]
hwifi_cfg_host_global_init_param: user num[8] ret[0]
hwifi_cfg_scan_para_cfg_init probe send times, ret 0 priv_value 2
get scan time, ret 0 priv_value 30
get scan count, ret 0 priv_value 2
hwifi_cfg_scan_probe_ie_cfg_init ret 0 priv_value 1
hwifi_cfg_scan_probe_del_wps_ie_cfg_init ret 0 priv_value 1
g_scan_probe_req_del_wps_ie = 1
hwifi_cfg_random_mac_addr_scan_init ret 0 priv_value 1
hwifi_cfg_random_mac_addr_scan_oui_init ret 65535 priv_value 0
hwifi_cfg_pcap_file_len_max_cfg_init ret 0 priv_value 12
hwifi_cfg_data_sample_param_init: data_sample[0] ret[0]
hwifi_cfg_host_global_init_param: apf enable[1] ret[0]
hwifi_cfg_host_global_init_param: 11ax protocol enable[0] re`

~ # dmesg |grep usb
usb_ver: 5.10 - 2.3
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uvcvideo
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[WING-USB][wing_usb_module_init]register wing usb driver
usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.