ss928在烧录ubuntu 1.1.2版本系统且更换plat_soc.ko、wifi_soc.ko、ws73_cfg.ini之后，无法连接上ssh的问题

dmesg看一下内核打印信息

root@localhost:~# dmesg
[ 2.592588] xhci-hcd 10300000.xhci_0: irq 48, io mem 0x10300000
[ 2.597822] hub 1-0:1.0: USB hub found
[ 2.600298] hub 1-0:1.0: 1 port detected
[ 2.603202] xhci-hcd 10300000.xhci_0: xHCI Host Controller
[ 2.607382] xhci-hcd 10300000.xhci_0: new USB bus registered, assigned bus number 2
[ 2.613786] xhci-hcd 10300000.xhci_0: Host supports USB 3.0 SuperSpeed
[ 2.619081] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 2.626349] hub 2-0:1.0: USB hub found
[ 2.628814] hub 2-0:1.0: 1 port detected
[ 2.631823] xhci-hcd 10320000.xhci_1: xHCI Host Controller
[ 2.636045] xhci-hcd 10320000.xhci_1: new USB bus registered, assigned bus number 3
[ 2.642733] xhci-hcd 10320000.xhci_1: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000020010010
[ 2.650857] xhci-hcd 10320000.xhci_1: irq 49, io mem 0x10320000
[ 2.655984] hub 3-0:1.0: USB hub found
[ 2.658457] hub 3-0:1.0: 1 port detected
[ 2.661333] xhci-hcd 10320000.xhci_1: xHCI Host Controller
[ 2.665651] xhci-hcd 10320000.xhci_1: new USB bus registered, assigned bus number 4
[ 2.672002] xhci-hcd 10320000.xhci_1: Host supports USB 3.0 SuperSpeed
[ 2.677301] usb usb4: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 2.684564] hub 4-0:1.0: USB hub found
[ 2.687029] hub 4-0:1.0: 1 port detected
[ 2.690184] usbcore: registered new interface driver cdc_wdm
[ 2.694631] usbcore: registered new interface driver usb-storage
[ 2.699404] usbcore: registered new interface driver ch341
[ 2.703611] usbserial: USB Serial support registered for ch341-uart
[ 2.708596] usbcore: registered new interface driver option
[ 2.712882] usbserial: USB Serial support registered for GSM modem (1-port)
[ 2.718947] mousedev: PS/2 mouse device common for all mice
[ 2.723436] i2c /dev entries driver
[ 2.730592] rtc rtc0: invalid alarm value: 2018-4-20 43:50:0
[ 2.735081] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
[ 2.743193] uvcvideo: Unable to create debugfs directory
[ 2.747270] usbcore: registered new interface driver uvcvideo
[ 2.751702] USB Video Class driver (1.1.1)
[ 2.755026] sdhci: Secure Digital Host Controller Interface driver
[ 2.759893] sdhci: Copyright(c) Pierre Ossman
[ 2.762956] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.768038] mmc0: CQHCI version 5.10
[ 2.795307] mmc0: SDHCI controller on 10020000.eMMC [10020000.eMMC] using ADMA 64-bit
[ 2.830257] mmc1: SDHCI controller on 10030000.SDIO [10030000.SDIO] using ADMA 64-bit
[ 2.862651] mmc2: SDHCI controller on 10040000.SDIO1 [10040000.SDIO1] using ADMA 64-bit
[ 2.870073] usbcore: registered new interface driver usbhid
[ 2.874371] usbhid: USB HID core driver
[ 2.880041] NET: Registered protocol family 10
[ 2.883895] Segment Routing with IPv6
[ 2.886319] NET: Registered protocol family 17
[ 2.889492] Bridge firewalling registered
[ 2.892189] can: controller area network core (rev 20170425 abi 9)
[ 2.897200] NET: Registered protocol family 29
[ 2.900342] can: raw protocol (rev 20170425)
[ 2.903311] can: broadcast manager protocol (rev 20170425 t)
[ 2.907660] can: netlink gateway (rev 20170425) max_hops=1
[ 2.911921] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.916541] Bluetooth: HIDP socket layer initialized
[ 2.920237] Key type dns_resolver registered
[ 2.923698] Loading compiled-in X.509 certificates
[ 2.928512] rtc-pcf8563 0-0051: setting system clock to 2018-04-17 11:58:16 UTC (1523966296)
[ 2.930195] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[ 2.935736] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.941462] mmcblk0: mmc0:0001 SLD64G 57.6 GiB
[ 2.948242] cfg80211: Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
[ 2.950745] mmcblk0boot0: mmc0:0001 SLD64G partition 1 4.00 MiB
[ 2.955627] clk: Not disabling unused clocks
[ 2.960573] mmcblk0boot1: mmc0:0001 SLD64G partition 2 4.00 MiB
[ 2.963193] ALSA device list:
[ 2.967995] mmcblk0rpmb: mmc0:0001 SLD64G partition 3 4.00 MiB, chardev (248:0)
[ 2.969442] No soundcards found.
[ 2.975883] mmcblk0: p1(boot) p2(env) p3(kernel) p4(rootfs)
[ 2.977689] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.989194] cfg80211: failed to load regulatory.db
[ 2.992756] uart-pl011 11040000.uart: no DMA platform data
[ 3.032793] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 3.064387] random: fast init done
[ 3.074338] EXT4-fs (mmcblk0p4): recovery complete
[ 3.077986] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.084817] VFS: Mounted root (ext4 filesystem) on device 179:4.
[ 3.089956] devtmpfs: mounted
[ 3.091716] Freeing unused kernel memory: 384K
[ 3.132660] Run /sbin/init as init process
[ 3.232512] systemd[1]: System time before build time, advancing clock.
[ 3.245605] systemd[1]: Failed to look up module alias ‘autofs4’: Function not implemented
[ 3.260915] systemd[1]: systemd 245.4-4ubuntu3.23 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.282555] systemd[1]: Detected architecture arm64.
[ 3.285565] hub 3-1:1.0: USB hub found
[ 3.288815] hub 3-1:1.0: 5 ports detected
[ 3.313202] systemd[1]: Set hostname to .
[ 3.380704] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 3.445199] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.525656] hub 4-1:1.0: USB hub found
[ 3.528200] hub 4-1:1.0: 4 ports detected
[ 3.627224] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.635111] systemd[1]: Created slice system-getty.slice.
[ 3.662843] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.669145] systemd[1]: Created slice system-modprobe.slice.
[ 3.703653] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 3.743655] systemd[1]: Created slice User and Session Slice.
[ 3.782958] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.822866] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.862862] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 3.873313] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.902795] systemd[1]: Reached target Paths.
[ 3.932737] systemd[1]: Reached target Slices.
[ 3.962728] systemd[1]: Reached target Swap.
[ 4.008157] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 4.043161] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.080519] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 4.088029] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.102632] usb 3-1.5: new high-speed USB device number 3 using xhci-hcd
[ 4.123274] systemd[1]: Listening on Journal Socket.
[ 4.153344] systemd[1]: Listening on Network Service Netlink Socket.
[ 4.183148] systemd[1]: Listening on udev Control Socket.
[ 4.212994] systemd[1]: Listening on udev Kernel Socket.
[ 4.243029] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 4.253349] systemd[1]: Mounting POSIX Message Queue File System…
[ 4.286086] systemd[1]: Mounting RPC Pipe File System…
[ 4.313216] systemd[1]: Condition check resulted in Kernel Debug File System being skipped.
[ 4.320553] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 4.332315] systemd[1]: Starting Journal Service…
[ 4.362988] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[ 4.376752] systemd[1]: Starting Load Kernel Module chromeos_pstore…
[ 4.406769] systemd[1]: Starting Load Kernel Module drm…
[ 4.436368] systemd[1]: Starting Load Kernel Module efi_pstore…
[ 4.466455] systemd[1]: Starting Load Kernel Module pstore_blk…
[ 4.496488] systemd[1]: Starting Load Kernel Module pstore_zone…
[ 4.526316] systemd[1]: Starting Load Kernel Module ramoops…
[ 4.555118] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 4.567322] systemd[1]: Starting Load Kernel Modules…
[ 4.606172] systemd[1]: Starting Remount Root and Kernel File Systems…
[ 4.646251] systemd[1]: Starting udev Coldplug all Devices…
[ 4.676890] systemd[1]: Started Journal Service.
[ 5.098049] systemd-journald[1095]: Received client request to flush runtime journal.
[ 5.107821] systemd-journald[1095]: File /var/log/journal/75c7b1a4a4a96e2e9bb0537165eb484f/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.089688] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.642790] random: crng init done
[ 6.642798] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.208401] i2c_soft: loading out-of-tree module taints kernel.
[ 7.209182] soft-i2c 0.i2c: freq:100000
[ 7.209196] [soft_i2c_func]
[ 7.209248] [soft_i2c_func]
[ 7.209634] soft-i2c 1.i2c: freq:100000
[ 7.209644] [soft_i2c_func]
[ 7.210106] [soft_i2c_func]
[ 7.234355] sprd_pci_ep_dev_init Quectel_Linux&Android_SPRD_PCIE_Driver_V1.1.8
[ 7.234707] sipc: name=sprd,sipc
[ 7.234713] sipc: type=1
[ 7.234715] sipc: dst =1
[ 7.234717] sipc: ep_dev=0
[ 7.234718] sipc: smem_type = 0
[ 7.235272] sipc: smem_base=0xfb400000, dst_smem_base=0xfb400000, smem_size=0x300000
[ 7.235276] sipc: high_offset=0x0n
[ 7.235279] smsg_ipc_create: sprd,sipc
[ 7.235827] smem_init: pool addr = 0xfb400000, size = 0x300000 added.
[ 7.235838] smsg_ipc_smem_init: ring_base = 0xfb400000, ring_size = 0x1000
[ 7.236729] spipe_probe!
[ 7.236740] spipe: after parse device tree, name=spipe_nr, dst=1, channel=4, ringnr=15, rxbuf_size=0x1000, txbuf_size=0x1000
[ 7.236750] sbuf_host_init: channel 1-4, offset = 0x0!
[ 7.237122] smsg_ch_open: channel 1-4 send open msg!
[ 7.237157] pcie res: request resource, state=0.
[ 7.241350] spipe_probe!
[ 7.241359] spipe: after parse device tree, name=sdiag_nr, dst=1, channel=21, ringnr=1, rxbuf_size=0x8000, txbuf_size=0x40000
[ 7.241370] sbuf_host_init: channel 1-21, offset = 0x0!
[ 7.256530] smsg_ch_open: channel 1-21 send open msg!
[ 7.256808] spipe_probe!
[ 7.256816] spipe: after parse device tree, name=stty_nr, dst=1, channel=6, ringnr=32, rxbuf_size=0x800, txbuf_size=0x800
[ 7.256827] sbuf_host_init: channel 1-6, offset = 0x0!
[ 7.258509] smsg_ch_open: channel 1-6 send open msg!
[ 7.266968] spipe_probe!
[ 7.266979] spipe: after parse device tree, name=snv_nr, dst=1, channel=40, ringnr=1, rxbuf_size=0x1000, txbuf_size=0x40400
[ 7.266990] sbuf_host_init: channel 1-40, offset = 0x0!
[ 7.282096] smsg_ch_open: channel 1-40 send open msg!
[ 7.282679] spool: name=slog_nr, dst=1, channel=5, pre_cfg=0
[ 7.282687] spool: tx_num=0, tx_size=0, rx_num=32, rx_size=65536
[ 7.285559] smsg_ch_open: channel 1-5 send open msg!
[ 7.298808] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.303629] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.308330] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.313057] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.317752] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.322438] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.327198] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.331908] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.336635] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.341326] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.346038] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.350735] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.355457] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.366285] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.370992] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.375717] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.380423] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.385157] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.389861] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.394595] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.399286] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.403997] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.408703] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.413415] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.418104] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.422808] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.427499] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.432204] bsp-i2c 11060000.i2c: wait idle abort!, RIS: 0x611
[ 7.437099] oled: probe of 0-003c failed with error -22
[ 7.514361] sensor_cfg,453: ==========sensor0: os08a20==========
[ 7.514370] sensor_cfg,453: ==========sensor1: os08a20==========
[ 7.514372] sensor_cfg,453: ==========sensor2: os08a20==========
[ 7.514374] sensor_cfg,453: ==========sensor3: os08a20==========
[ 7.527309] Module ot_media: init ok
[ 7.527317] Media Memory Zone Manager
[ 7.527545] load ot_osal 1.0 ….OK!
[ 7.536689] ot_base: module license ‘Proprietary’ taints kernel.
[ 7.536697] Disabling lock debugging due to kernel taint
[ 7.564703] load sys.ko ….OK!
[ 7.579908] load tde.ko ….OK!
[ 7.593474] load region.ko ….OK!
[ 7.617581] load gdc.ko ….OK!
[ 7.637717] load vpp.ko ….OK!
[ 7.659639] load vgs.ko ….OK!
[ 7.671518] load dis.ko ….OK!
[ 7.710569] load vpss.ko ….OK!
[ 7.747564] load vi.ko ….OK!
[ 7.772549] load isp.ko ….OK!
[ 7.788124] load pqp.ko ….OK!
[ 7.805260] load mcf.ko ….OK!
[ 7.823990] load avs.ko ….OK!
[ 7.857010] load vo.ko ….OK!
[ 7.892098] load gfbg.ko ….OK!
[ 7.900977] load chnl.ko ….OK!
[ 7.910689] load vedu.ko ….OK!
[ 7.922784] load rc.ko ….OK!
[ 7.947642] load venc.ko ….OK!
[ 7.960865] load h264e.ko ….OK!
[ 7.975235] load h265e.ko ….OK!
[ 7.985067] load jpege.ko ….OK!
[ 7.994595] load jpegd.ko ….OK!
[ 8.031076] load vfmw.ko ….OK!
[ 8.048808] load vdec.ko ….OK!
[ 8.057380] load uvc.ko ….OK!
[ 8.077893] load ive.ko ….OK!
[ 8.092738] load dpu_rect.ko ….OK!
[ 8.107616] load dpu_match.ko ….OK!
[ 8.120321] load mau.ko ….OK!
[ 8.138142] load ot_npu_device.ko ….OK!
[ 8.150121] load ot_npu_aicpu.ko ….OK!
[ 8.159573] load ot_npu_dfx.ko ….OK!
[ 8.191598] load ot_npu_tsfw.ko ….OK!
[ 8.205218] ot_dsp: Unknown symbol ipcm_vdd_disconnect (err -2)
[ 8.205259] ot_dsp: Unknown symbol ipcm_vdd_connect (err -2)
[ 8.205278] ot_dsp: Unknown symbol ipcm_vdd_open (err -2)
[ 8.205313] ot_dsp: Unknown symbol ipcm_vdd_check_handle (err -2)
[ 8.205323] ot_dsp: Unknown symbol ipcm_vdd_sendmsg (err -2)
[ 8.205396] ot_dsp: Unknown symbol ipcm_vdd_getopt (err -2)
[ 8.205418] ot_dsp: Unknown symbol ipcm_vdd_close (err -2)
[ 8.205480] ot_dsp: Unknown symbol ipcm_vdd_setopt (err -2)
[ 8.205526] ot_dsp: Unknown symbol ipcm_vdd_node_ready (err -2)
[ 8.270506] load pwm.ko ….OK!
[ 8.278421] load ot_piris.ko ….OK!
[ 8.292158] load sensor_spi.ko ….OK!
[ 8.322174] load hdmi.ko OK!
[ 8.333151] load mipi_tx.ko ….OK!
[ 8.343941] load aio.ko ….OK!
[ 8.359295] load ai.ko ….OK!
[ 8.371017] load ao.ko ….OK!
[ 8.380357] load aenc.ko ….OK!
[ 8.389122] load adec.ko ….OK!
[ 8.648123] load acodec.ko ….OK!
[ 8.662041] load mipi_rx.ko ….OK!
[ 8.669079] load ot_user ….OK!
[ 8.676569] load photo.ko ….OK!
[ 8.685142] usb 3-1: USB disconnect, device number 2
[ 8.685154] usb 3-1.5: USB disconnect, device number 3
[ 8.718946] plat_soc:W]ini_file_name@/etc/ws73_cfg.ini
[ 8.720275] plat_soc:EMERG]0:emerg log.
[ 8.723041] plat_soc:ALERT]1:alert log.
[ 8.725656] plat_soc:CRIT]2:crit log.
[ 8.728090] plat_soc:E]3:err log.
[ 8.730177] plat_soc:W]4:warning log.
[ 8.730180] plat_soc:E]custom ini[plat kern log level]: 7.
[ 8.787110] plat_soc:E]board_power_gpio_init::succ, power_gpio_idx=[40]!
[ 8.793829] plat_soc:E]board_wakeup_gpio_init::succ, wkup_gpio_idx=[70]!
[ 8.800313] [USB][I]OFF —> INIT
[usb_set_bus_state:87]
[ 8.800444] usbcore: registered new interface driver wireless_usb
[ 8.802078] plat_soc:E]hcc diag log service ini ok
[ 8.803586] usb 4-1: USB disconnect, device number 2
[ 8.806589] plat_soc:W]plat_misc_init!
[ 8.806620] plat_soc:W]plat_init_etc::succ!

[ 8.894291] insmod wifi ko beginning!
[ 8.894414] [osal_kthread_set_priority_ws73:137]:task is invalid!
[ 8.894919] [osal_kthread_set_priority_ws73:137]:task is invalid!
[ 8.895047] [FRW] frw_timer_init enter
[ 8.895061] frw_start_hcc_service type:6, ret=0
[ 8.895064] frw_start_hcc_service type:4, ret=0
[ 8.895066] [FRW] frw_main_init_etc end
[ 8.919947] hwifi_custom_host_read_cfg_init finish!
[ 8.919958] hwifi_cfg_host_global_init_param: rx_stbc[1] ret[0]
[ 8.919960] hwifi_cfg_tcp_ack_param_init: tcp_ack_filter_enable[1] ret[0]
[ 8.919963] hwifi_cfg_tcp_ack_param_init: tcp_ack_max_num_start_process[2] ret[0]
[ 8.919967] hwifi_cfg_host_global_init_param: user num[8] ret[0]
[ 8.919969] hwifi_cfg_scan_para_cfg_init probe send times, ret 0 priv_value 2
[ 8.919971] get scan time, ret 0 priv_value 30
[ 8.919973] get scan count, ret 0 priv_value 2
[ 8.919976] hwifi_cfg_scan_probe_ie_cfg_init ret 0 priv_value 1
[ 8.919978] hwifi_cfg_scan_probe_del_wps_ie_cfg_init ret 0 priv_value 1
[ 8.919980] g_scan_probe_req_del_wps_ie = 1
[ 8.919982] hwifi_cfg_random_mac_addr_scan_init ret 0 priv_value 1
[ 8.919984] hwifi_cfg_random_mac_addr_scan_oui_init ret 65535 priv_value 0
[ 8.919986] hwifi_cfg_pcap_file_len_max_cfg_init ret 0 priv_value 12
[ 8.919988] hwifi_cfg_data_sample_param_init: data_sample[0] ret[0]
[ 8.919990] hwifi_cfg_host_global_init_param: apf enable[1] ret[0]
[ 8.919992] hwifi_cfg_host_global_init_param: 11ax protocol enable[0] ret[0]
[ 8.919994] hwifi_cfg_host_global_init_param: wow_event[15] ret[0]
[ 8.919995] hwifi_cfg_host_global_init_param: wow_enable[1] ret[0]
[ 8.919997] hwifi_cfg_host_global_init_param: smooth_phase_en[1] ret[0]
[ 8.920091] hwifi_cfg_host_global_init_param: over_ds_en[1] ret[0]
[ 8.920165] {wal_set_wlan_name_config::g_wlan_name[0]=wlan0}
[ 8.920240] {wal_set_wlan_name_config::g_wlan_name[1]=wlan1}
[ 8.920318] {wal_set_wlan_name_config::g_wlan_name[2]=p2p0}
[ 8.921450] dfx_user_rd_init success!
[ 8.921505] hmac_register_pm_callback_etc:wlan_pm_get_wifi_srv_handler_etc is null
[ 8.924478] plat_soc:E]pm_svc_open::first svc open, pm_svc_power_on!
[ 9.032677] usb 1-1: new full-speed USB device number 2 using xhci-hcd
[ 9.240522] [USB][I]boot usb[oal_usb_probe:1424]
[ 9.240555] [USB][I]bulk_in_ep:0x81[oal_usb_boot_bulk_in_probe:1324]
[ 9.240567] [USB][I]dev->bulk_out_ep:0x1[oal_usb_boot_bulk_out_probe:1355]
[ 9.240571] [USB][I]INIT —> BOOT
[usb_set_bus_state:87]
[ 9.240582] [USB][I]usb boot probe success[oal_usb_boot_init_config:1398]
[ 9.261672] plat_soc:E]firmware_download_etc begin
[ 9.271329] plat_soc:E][/etc/ws73/ws73.bin] sha256sum check succ!!
[ 9.443935] plat_soc:E][/etc/ws73/wifi_cali.bin] sha256sum check succ!!
[ 9.475030] plat_soc:E][/etc/ws73/btc_cali.bin] sha256sum check succ!!
[ 9.493981] usb 1-1: USB disconnect, device number 2
[ 9.494160] [USB][I]usb disconnect
[oal_usb_disconnect:1584]
[ 9.494174] [USB][I]BOOT —> DISCONNECT
[usb_set_bus_state:87]
[ 9.582711] usb 4-1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[ 9.669555] hub 4-1:1.0: USB hub found
[ 9.669727] hub 4-1:1.0: 4 ports detected
[ 9.782665] usb 3-1: new high-speed USB device number 4 using xhci-hcd
[ 9.892622] usb 1-1: new high-speed USB device number 3 using xhci-hcd
[ 10.005642] hub 3-1:1.0: USB hub found
[ 10.005779] hub 3-1:1.0: 5 ports detected
[ 10.082981] [USB][I]kernel usb[oal_usb_probe:1419]
[ 10.082995] [USB][I]7 5 81 2 200 0[oal_usb_system_init_bulk_ep:950]
[ 10.082999] [USB][I]EP bulk_in:129, bulk_out:1, int_in:131[oal_usb_system_ep_init:1047]
[ 10.083002] [USB][I]rw reg ep_in:[130], ep_out:[2][oal_usb_init_rw_reg_ep:928]
[ 10.083154] [USB][I]start[usb_transfer_rx_data_handle:795]
[ 10.083271] [USB][I]DISCONNECT —> WORK
[usb_set_bus_state:87]
[ 10.083282] [USB][I]oal_usb_probe success![oal_usb_system_init_config:1099]
[ 10.083295] [USB][I]usb_reload succ[hcc_usb_reload:1667]
[ 10.083309] plat_soc:E]firmware_download_etc::succ!
[ 10.086973] plat_soc:W]download firmware, count [1], current time [825302]us, max time [825302]us
[ 10.089318] plat_soc:E]plat handle hcc msg dev_bsp_ready_cb.
[ 10.093809] plat_soc:E]===BSP READY==
[ 10.099670] plat_soc:E]ini get mac_addr failed
[ 10.110403] plat_soc:W]power on, count [1], current time [1180771]us, max time [1180771]us
[ 10.110407] plat_soc:W]pm_svc_open::first svc open, pm_svc_power_on succ!
[ 10.110410] plat_soc:E]pm_svc_open::wlan open.
[ 10.113781] plat_soc:E]pm_svc_open::SUCC!
[ 10.116567] plat_soc:E]wlan_power_open_cmd
[ 10.116782] plat_soc:E]===wlan READY==
[ 10.130643] hwifi_custom_adapt_mac_device_priv_ini_param::ldpc[1].
[ 10.130649] hwifi_custom_adapt_mac_device_priv_ini_param::front_switch[0].
[ 10.130652] hwifi_custom_adapt_device_priv_ini_cali_mask_param::read cali_mask[8110]ret[0]
[ 10.130656] hwifi_custom_adapt_mac_device_priv_ini_param::g_uc_wlan_open_cnt[1]priv_cali_data_up_down[0x14]
[ 10.130658] hwifi_custom_adapt_mac_device_priv_ini_param::g_uc_custom_cali_done_etc[0]auto_cali_mask[0x0]
[ 10.130660] hwifi_custom_adapt_device_priv_ini_param::data_len[46]
[ 10.130662] hwifi_hcc_custom_ini_data_buf:46 **
[ 10.130681] hwifi_hcc_custom_ini_data_buf:22 **
[ 10.142903] ===hal_initialize_phy===269===
[ 10.210531] ====hal_device_state_init_event=====620===21=
[ 10.214829] hwifi_get_country_code_etc suc: code:CN
[ 10.214975] hwifi_get_region 99: region not found
[ 10.215010] hwifi_get_region find CN in region_table_default
[ 10.287409] plat_soc:E]===wlan READY==
[ 10.290410] vap_id[0] {hmac_config_set_cus_dts_cali::cali time[34]ms ret[0]}
[ 10.290425] save cali data len:864 ret:0.
[ 10.290435] host_module_init_etc:: host_main_init finish!
[ 10.290443] WiFi Init OK.
[ 10.290446] wifi_host_init_finish![wifi_init cost 1363 ms].
[ 10.290549] plat_soc:E]wlan_close_etc, exit_later_func
[ 10.294782] plat_soc:E]pm_svc_close::not rmmod svc [0], return.
[ 10.299501] wifi_host_init_finish![wifi_cali1 cost 1372 ms].
[ 10.299514] insmod wifi ko finished!
[ 10.299946] [HCC] set default params
[ 10.299951] [HCC] adv_interval=0x0080
[ 10.299953] [HCC] scan_interval=0x0060
[ 10.299954] [HCC] scan_window=0x0030
[ 10.299956] [HCC] conn_interval=0x0038
[ 10.299957] [HCC] supv_timeout=0x008a
[ 10.332896] plat_soc:E]hbsle_hcc_custom_ini_data_buf:144 **
[ 10.338232] [HCC] get bsle custom para data
[ 10.338310] [HCC] enter:hcc_adapt_bsle_msg_free
[ 10.338564] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.362636] [HCC] get device status:2,result:1,time:24
[ 10.362642] plat_soc:W]bsle_open_close_cmd, service[1], type[1].
[ 10.362807] plat_soc:E]pm_svc_open::SUCC!
[ 10.363695] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.365595] [HCC] pm_ble_open success
[ 10.372545] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.377444] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.378693] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.381541] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.384426] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.387292] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.390042] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.392925] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.395793] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.398541] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.401416] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.401558] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.401790] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.402312] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:2
[ 10.402417] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:2,device_msg:1
[ 10.402444] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:4,device_msg:0
[ 10.402446] [HCC] Get bsle device action msg, type=[0]
[ 10.402448] [HCC] ble_enable_reply_cb is NULL, return!
[ 10.422623] [HCC] get device status:1,result:1,time:57
[ 10.422634] [HCC] BLE Mac Addr: 14:5d:34:93::
[ 10.422648] [HCC] begin to register hci device
[ 10.422651] [HCC] bt_register_hci_dev enter
[ 10.422942] [HCC] bt_register_hci_dev exit
[ 10.423051] [HCC] enter hci_bt_open
[ 10.423057] plat_soc:W]bsle_open_close_cmd, service[1], type[1].
[ 10.423420] [HCC] hcc bt rx proc ble closed
[ 10.423430] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:4,device_msg:0
[ 10.423432] [HCC] Get bsle device action msg, type=[0]
[ 10.423435] [HCC] ble btc open finish
[ 10.430743] plat_soc:W]bsle_open_close_cmd, service[2], type[1].
[ 10.431051] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:4,device_msg:2
[ 10.431057] [HCC] Get bsle device action msg, type=[2]
[ 10.431059] [HCC] sle_enable_reply_cb is NULL, return!
[ 10.431346] plat_soc:E]pm_svc_open::SUCC!
[ 10.434418] pm_sle_open success
[ 10.434426] [HCC] get device status:1,result:1,time:0
[ 10.434439] sle_dev_init enter
[ 10.434676] sle_dev_init register sle soc device, ret:0
[ 10.434845] sle_probe:295 in
[ 10.435032] sle_probe sle_misc_device_register ret:0
[ 10.435118] sle_dev_init register platform sle driver, ret:0
[ 10.435120] sle device open success
[ 10.452661] [HCC] ble open time:29
[ 10.452671] [HCC] hci_bt_setup
[ 10.752667] usb 3-1.5: new high-speed USB device number 5 using xhci-hcd
[ 12.482649] [HCC] hci_bt_flush
[ 12.482659] [HCC] hci_bt_close
[ 12.482670] plat_soc:W]bsle_open_close_cmd, service[1], type[0].
[ 12.483217] [HCC] start hcc_adapt_bsle_msg_rx_proc,type:4,device_msg:1
[ 12.483221] [HCC] Get bsle device action msg, type=[1]
[ 12.483223] [HCC] ble btc close finish
[ 12.512611] [HCC] ble close time:30
[ 13.369067] gmac_v200 10290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 13.369099] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 68.326180] wal_netdev_open_etc,dev_name is:wlan0
[ 68.326194] plat_soc:E]pm_svc_open::not insmod service[0], return already opened.
[ 68.332457] plat_soc:E]wlan_power_open_cmd
[ 68.332668] plat_soc:E]===wlan READY==
[ 68.346429] hwifi_custom_adapt_mac_device_priv_ini_param::ldpc[1].
[ 68.346435] hwifi_custom_adapt_mac_device_priv_ini_param::front_switch[0].
[ 68.346438] hwifi_custom_adapt_device_priv_ini_cali_mask_param::read cali_mask[8110]ret[0]
[ 68.346441] hwifi_custom_adapt_mac_device_priv_ini_param::g_uc_wlan_open_cnt[2]priv_cali_data_up_down[0x10]
[ 68.346444] hwifi_custom_adapt_mac_device_priv_ini_param::g_uc_custom_cali_done_etc[1]auto_cali_mask[0x0]
[ 68.346446] hwifi_custom_adapt_device_priv_ini_param::data_len[46]
[ 68.346448] hwifi_hcc_custom_ini_data_buf:46 **
[ 68.346465] hwifi_hcc_custom_ini_data_buf:22 **
[ 68.349582] func[frw_msg_exec_callback] line[338] msg_id[47] callback unregistered
[ 68.358942] ===hal_initialize_phy===269===
[ 68.426405] ====hal_device_state_init_event=====620===21=
[ 68.430434] hwifi_get_country_code_etc already set country:CN
[ 68.431526] plat_soc:E]===wlan READY==
[ 68.434057] vap_id[0] {hmac_config_set_cus_dts_cali::cali time[3]ms ret[0]}
[ 68.434070] wifi_host_init_finish![wifi_cali1 cost 58144 ms].
[ 68.438700] hmac_fsm_change_state_etc state 5, vap_id 1

问题出现在我试图使用网线局域网ssh时。而当我连上wifi之后，能够使用wifi的ip ssh到，问题解决。